Five Lighting Arrangements For Your Product Photography.

What camera should I buy? ­-is one of the most frequently asked question asked by many. It is a common belief of many that good pictures require advanced cameras and photography kits. Indeed a camera with advanced kits is very important, but this is not the only thing to execute a successful photography. There are several other factors one must consider to get the desired output. Among the important features, lighting is one of the most vital element of photography. No matter what photo does one take, without proper product photography lighting arrangement, the photograph does not come alive.

 Product Photography

In this article we’ll look at the lighting arrangements of product photography. Product photography is a whole different branch of photography. It requires special expertise and prior experience to bring out the accurate and desired photos. Since products are put up for sale, they must look appealing to the customers. Needless to say, a sad looking product won’t never sell, or even if it sells, it won’t generate much of a profit.  Product photographs are mostly shown in e-commerce site, personal company website and profile, TVC, PPC, Billboards, brochure etc. Although in photography post production, the lights, colors, and exposure could be retouched, natural and live lighting arrangement always give the best output.

 Product Photography Lighting

Product Photography Lighting

Among the most frequently advised product photography tips, the first thing that comes on top of the list is photography lighting. Without appropriate lighting, the product will be less eye-soothing to the consumers, which will result in a low selling rate. So, what actually are the lighting arrangements? How should we apply or arrange the lightings? Do we need to be experts of lights? Not necessarily. Here are five quick, easy, and effective lighting formation. Just pick any of the arrangement you prefer for your products.

 Pre-production Arrangement

Before going into the arrangements, let us look at the kits you need for the lighting. Apart from the natural sunlight, light bulbs, camera flash, studio lights, diffusion sheet, white background, light tents, soft boxes, stand, tripod etc.

Setting the Background

White backgrounds are the most common set up for product photography. This background reflects the light perfectly from all sections and creates a glowing atmosphere. As a result, the products shine. Other than white background, there are several ways to use the bulbs to improvise the image. We’ll discuss about them in next section.

Setting the Background

Manage Your Light Control

Tradition bulbs and studio lights, both are used in product photography. While traditional bulbs are becoming obsolete now-a-days, studio lights are very popular in product photography. However, since lights and bulbs are direct and sharp on the photo, it is very difficult to retain the exotic look of the product.

Manage Your Light Control

For that we must use diffusion kits to balance the sharpness and direct light from the bulbs. There are three ways to diffuse the lights- Diffusion Sheet, Light Tent, and Soft Box. To learn more about product photography lighting kits, click here.

Now let us look at the five formation or arrangements of product lighting.

1.The Light-box with Reflection: Create a box with a packaging box, tracing/white papers or sheets. Place two soft box or studio box light on left and right side of the paper box. Place a glass inside the box, but make sure you have a white background beneath the glass too. Now, place the product in the middle of the glass. Shoot your product until you get your perfect shot.

2.Top and Umbrella Light against White Background: A product placed on a white surface against a white background will look great if a light is placed on the top and two umbrella lights are aimed from two corners. In this way, the product will get full lighting attention from all corners and from the above, plus the white surface and background will reflect the light which eventually will create a glowing atmosphere.

3.Lighting From Below Through a Transparent Surface: A transparent glass is needed for this kind of lighting. A soft light should be placed under the glass table pointing upwards and the product will be placed over the glass. Glass products, for example, bottles, jars, show pieces, and other glossy items are the best option for this kind of photography. To show the name of the product properly, use another light from the top. In this way, the product will be in a sandwich of light. Now, shoot until you get your perfect one.

arrangements of product lighting.

4.Lighting from the Back: Back lighting sounds difficult to handle. Indeed it is, but it can offer much more if handled tactfully. It is also called the Rim-Lighting. Two lights can be placed on the background, one in the left corner and another in the right corner. The problem is that, until you place black box in the middle of the light, the light frame you’re looking for won’t come out. Therefore, place a box to create shadow and then shoot your photo.

5.Fill in Light and White Background Photography (Large Products): If you want to shoot a large product, for example a chair or a bookshelf, make sure you place the lights from every angle where the photo is going to be shown. Place the product in front of a white background. Lit a blub above the product and use two fill lights from two angels. In this way, no shadow will be created. Adjust the exposure and aperture of your camera and shoot. Before shooting, you can also use a grey card which will ensure that no outside lights are hampering the product.


Once you’re done with your photo-shoot, you may send them for post processing. In many occasions, after the photo-shoot, you’ll be needing clipping path, ghost mannequin, or masking service to remove thee products from backgrounds. These features are skillfully handled by image editing service providers. Since you’re a busy photographer and lack time to readjust and extract images one by one, all you need to do is, send the pictures to any prominent and trusted photo editing service provider.


Post-processing from outside surely will save you time in exchange of a little money. Remember, the money you spend in post-processing is actually saving you more, because time is money and you’re saving time here.


How to Start a Business with Footwear Photography

Online shopping has gained popularity in recent years and it is increasing day by day. A major difference between online shopping and traditional shopping is in the case of online shopping, it is not possible to touch the product physically. So there are only two options for customers to make the decision for purchasing that product- product descriptions and product images. For this reason, publishing multiple, high-quality images of each product is the main priority for e-commerce site owners. According to eBay, a clear and detailed product image can boost up it’s a sale by 2%. Amazon and eBay have features to upload 9-12 images of each product, some images are very much important.

For achieving this goal, e-commerce owners need expert product photographers and graphic designers who can shoot and edit product photos. So, let’s focus on our article headline. We are talking about product photography business. Our product focus is “footwear”.

So what do you think? Is it a cool idea to start a footwear photography business for helping e-commerce sites and bringing benefit for the both ends? Here we are going to give you some tips which will surely help you.

Never go for unnecessary gears and business purchases

On the internet, you will be flooded with tons of photography gear advertisements. It is very much obvious that you may be allured by those. Buying new gadgets and gears can be a great fun and many will advise you with the phrase “it will help your business”.


They may suggest that if you just had that better lens, you’d take better photos, and your business would be more successful. But it will be hazardous if you purchase gears and other photography equipment without a proper plan and money management.

Learn to shoot manually

When you seriously think about footwear photography, you must have to learn to shoot with your camera manual. Most of us feel it is much easier to capture the product images with the default settings of the camera. But this tendency will hinder you from bringing out the maximum result from your camera.So it is very much important to learn the footwear photography manually. As footwear’s are small products, you need to shoot it very precisely.


The real benefit of manual mode shooting is it will help you to learn what’s going on with your camera, and the light around you. As early as you learn it, soon you will get control over your camera and your shooting skill will improve. Manual mode will make your exposures consistent, which helps you save time with your editing.

Be a photographer and businessman

As your target is to create your own business based on footwear photography, you must have to develop a business sense with photography skill. Great business is solely interlinked with great photography.


When you get started with great photography skills, still the probability of being successful in photography business is 50-50. Let me explain why? When you have taken a decision to start a photography business, you must have to earn multi-tasking ability. You are a photographer/customer service expert/book keeper/marketing director/social media whiz/branding guy/website creation person/secretary/treasurer/CEO/CFO/ and pretty much any other title you can think of. That means you have to develop various skills. Skills are very much important.

Patience is important

This virtue is very much essential if you want to be successful a successful footwear photography business person. You have to utter this word constantly to remind yourself. You must have to remember that you won’t get success overnight.

patience-is-importantIt will take time to get good at photography, marketing customer service, management of business organization. Frankly speaking, it will take time to get good at many things to run a hugely successful photography business.

Create your own branding

Performing right promotional activities is the key point of photography business success. Through away your outdated print materials, brochures, packaging, and thousands of business cards to the trash bin. Because all these are totally useless, and a big waste of money and paper.


When you think about footwear photography business branding, creating something personal, unique and consistent is very much important. It will help you stand out from other photographers and photography firm and differentiate you from others.

So should you avoid the printed products for promotion? No. But you must have to be very much careful. In most of the cases, a huge amount of brochures may be wasted or just cannot be used or reached proper destination. Try to find ways to print on demand or in a limited scale. Analyze your necessity and fix your target where or to whom you want to promote.

Influence people to stay with you

Good word of mouth referrals are the most powerful ways for photography business success. People trust the recommendation of a friend more than an ad in a magazine.


You need to influence people to get great testimonials from them by providing them quality service. Such recommendation is more valuable than ad promotions.

Market your brand or die

Now all you are set. You have everything- a blog, a website, a business and you have a brilliant idea. You make a gorgeous logo. You create a stunning online presence, filled with witty writing and attractive images. You press publish, sit back, and wait for the inquiries and comments to pour in. And then nothing is positive! And then you can understand what marketing is all about.


Show people what your service interesting and valuable. You could have the most amazing photography in the world, but unless people know about it, you will not see any success. Make Things Easy For Your Clients. Be organized and value your time. Keep all the details of your business records, think big.

20 Most Important Photoshop Shortcuts

Today Photoshop Shortcuts has been the program on which most of the graphic designers are highly dependent on. Though there is some other useful software available to them, this one has proved to be of the greatest use. Professional find almost all possible image related solution in Photoshop. But one important thing is the shortcuts they usually use in this program. The importance of these shortcut remains in the efficiency of work with this program. Doubtlessly they gear up the regular work flow of the creative designers. These are used with a view to making the work faster. While working in Photoshop, small tasks may appear as a big hindrance to the work. So a professional must know about these shortcuts of Photoshop. Her we will see how the common but very crucial works can be done within just a few key pressing on the key board.

1.Fill a Layer: When an image editor needs to fill an empty layer with any specific color he may take the help of a nice short way and this is to press Alt+Delete on the foreground and Ctrl+Delete on the background.

fill a layer shortcut 2.Flatten Layers: At times the working professional want to flatten the layers. After adding a new, empty layer there lies the necessity of flatten those. To do it one can take the easy way of pressing Ctrl+Alt+Shift+E

Flatten Layers image

3.Merge Visible Layers: Another thing is that many a times designers want to create a single layer comprising all other layers created before. But this work may be a difficult job by clicking mouse buttons. Easy way of this is pressing Ctrl, Shift and E altogether.

Merge Visible Layers Image

4.New Layer via Copy: in the case of the need for a new layer one can just press Ctrl+J and the target is fulfilled. It’s so easy in this way and gives one the chance for continuous working.

New Layer via Copy
5.Bring Layer to top of stack: Not all layers are equally important for the work. On the other hand some are highly preferred that they are needed to be on the top of other layers. So just one thing that the designer needs to do is to press Ctrl+Shift+]

Bring Layer Forward1

6.Send Layer to Bottom of stack: In the same way of taking layer at the bottom a designer can take that at the bottom as well. For that he has to do nothing special but the same thing apar from the third bracket. He must press Ctrl+Shift+[.

Send Layer to Bottom of stack
7.Bring Layer Forward: A small work of Photoshop is to bring any selected layer forward. But if you are working on keyboard, you don’t need to touch the mouse. Rather, only pressing Ctrl+] will make your work done.

Bring Layer to top of stack

8.Send Layer Back: As it may seem to be of necessity to move the layer back to the others, it can be also done with a quicker way by taping the key board short cut Ctrl+[

Send Layer Back Image9.Copy Multiple Layers: Copying multiple layers is a usual work for any image manipulator. For doing this drawing a selection must be done and then use the command of Shift+Ctrl+C to take every layer into the clipping, rather than taking only the current layer selection.

Copy Multiple Layers Image

10. Reselect: In case of accidental moving away from reselection one can easily be back from there using a nice keyboard short cut. He has to press Ctrl+Shift+D. By this means the earlier selection will be back.


11.Invert Selection: Sometimes the professionals need to select objects around an already pre-selected image. This mainly helps to work on the main focused part without loosing the remaing parts of it.

Photoshop Invert Selection Image12.Select All Layers: Manipulating the overall image needs the total selection. But if one is thinking it by mouch it may haper the regular work flow. But there is a solution for it. He can press Ctrl+Alt+A.

Select All Layers Image

13.Select Bottom Layer: If someone want to select the last ever layer of his project, a small technique can be proved very handy for him. Alt+Comma(,) will select the bottom layer within just the time of taping the buttons.

Select Bottom Layer Image14.Select Top Layer: In the same way of selecting bottom layer, selecting the top layer is also possible within very short time and in a convenient manner. For this the designer has to just press Alt+Period(.). It will immediately select the upmost layer.

Select Top Layer

15.Deselect from the Selection Area: Provided that one needs to deselect certain part of the image, one easy way can be hitting the keys Alt+drag.

Deselect from the Selection Area

16.Deselect all but the Intersected Area: Professional designers know the importance of deselecting all but a certain part. For doing it he may take the help of the easy way of clicking Shift+Alt+drag.

Deselect all but the Intersected Area

17.Deselect the Entire image: When getting away from the image is necessary, a nice way is arranged for the professionals in Photoshop. They can just hit Ctrl+D to satisfy their need.

Deselect the Entire image18.Find the Sizing Handles: One difficult activity that Photoshop experts regularly experience is that pasting a layer or selection into a Photoshop image. In such cases finding the sizing handles becomes a tough job. The command of hitting Ctrl+T and then Ctrl+O selects Transform and fits the image inside the window.

Find the Sizing Handles Image19.Move a Selection: If any designer wants to move a selected part easily he just needs to press and hold the space bar and keep on doing so until the selected part reaches to the place that it is intended to reach. So the shortcut for it is Spacebar+Marquee Tool.

Move a Selection20.Select Individual channels: Selecting with Photoshop Channels is a wonderful way of work in this program. It makes a complex object removed from the background. Though there is several other ways by which the same job can be accomplished, it is much easier. And using the shortcut of Ctrl+3(red), 4(green), 5(blue) makes it even simpler.

Select Individual channels

There are several professional designers who are doubtlessly creative but they waste a huge time in the processing of their desired Photoshop Shortcuts command. Adopting the above mentioned short-cuts the designer may decrease the wastage of his time.

 Most Important 20 Photoshop Shortcuts

Make a 3D Layer Text Effect in Photoshop

Today we will try to make a 3D Layer text effect through Photoshop. Create a new document with the size 1500 x 1000 pixels. In where I set background will set at gray color. Resolution will be high and 300 pixel/Inch. Font size will be 93px and black and used Bauhaus 93 font.

Now go to Layers palette and select without Background all of Layers. Then follow this:

Layer – Align – Vertical Centers and again Layer > Align > Horizontal Centers. It needs when we will make Rays.

Now create a new layer named it Strip. Through press “d” set the background color Black and White. Then press “x” swaps colors. To fill the strip layer press Alt+Backspace. Then go to Filter – Sketch – Halftone Pattern and set Size (3), Contrast (50) and pattern type – line. Press OK.

Press Alt+Click between the Color Experts and Strip Layer. Press Ctrl+T or go to Edit – Transform and expand it from up and down. Also left and right. It will look as the picture. Go the Layer Palette and select both layer strip and Color Experts and press Ctrl+E to merge these.

Press the Ctrl+Click on the Strip Layer and press Ctrl+c. Then go to channel and create new and paste by press Ctrl+v. To make some rounded deselect it through pressing Ctrl+D. Now go to Filter – Blur – Gaussian Blur set the following.  Radious 2 pixel, go to image – Adjustment – Level and set shadow input level to 120, highlight input level at 155. Press OK and here if you see any small white area fill it by black color. The image will look like:

Read More

Adobe Photoshop CS5 Tutorial For Beginners

Get started with Adobe Photoshop CS5

Adobe Photoshop CS5

To design a photo we can use different kind of software. Also we can edit usually through Paint, It can be Microsoft Office Picture Manager, Windows Photo Viewer etc. But if you want more then you can use Paint.Net, Picasa, and Adobe Photoshop like (CS, CS3, and now update version running CS6). Also you can make Illustrator, Photometric and so on. But I think everybody try to collect the latest one. If I describe it then give to need an example. Like if you use Photoshop software, then here are old one is CS. But in this software you don’t get the 3D option. Even not in CS1 or CS2. If you got in CS3 but it is not faster and you don’t found the more as you want.  You will get it in Photoshop CS4 and it some faster also CS5 be. But in the latest one, I mean CS6 is very faster and helpful. Here you will get more and more option to design.

In this Article I try to give a short Adobe Photoshop CS5 Tutorial For Beginners. I will describe about its option, how work, and in which way we can get more and more exceptional design.

Download from the internet the software. But it will be 30 days trial version. If you have credit card you can buy its premium version. Let’s start, when you go to open the software you can see the four to five option. It will contain under Adobe Design Premium CS5 / CS6. The option looks like Adobe Bridge CS5, Adobe Device Central CS5, Adobe ExtendScript Toolkit CS5, Adobe Extension Manager CS5, Adobe Photoshop CS5 etc.

Now open through clicking on Adobe Photoshop CS5. Then you will see the following option like File, Edit, Image, Layer, Select, Filter, Analysis, 3D, View, Window, Help, Br, Mb, Essentials, Design, Painting, CS live and so on. All of the above menu have submenu. To edit an image we go to File->New. For Open a file go to File->Open. To Save a file click on save and save it as your wishes name. Here if you observe you will get more and more option. Like Open as, save as, Browse, Import, Exit and so many. As a file menu we will get more and extra option to edit an image. Its exceptional feature is 3D. Really if you use Adobe Photoshop obviously you must get an awesome and reflecting and heavy designed image. I edit this image just go to by Filter and choose an option. Don’t miss it. Try to now.

Easy way to create an Ice text effect

In this tutorial we need special font and a canvas with the size of 1600 x 1200. With the adobe Photoshop we will open a new document with the above size. Let’s start to make it. The foreground and background color will be #000000 and #000000.

Then choose the text and write something on text layer. I wrote “F”, but you can write anything on your layer. After writing your text will look like below:

raw ice text

Ice text effect in Photoshop

Now go to Blending Option. For these go to Menu to Layer. From Layer to layer Style then Stroke. Then select color reset stroke at 15. This will look like the text more gorgeous.

In here create a new layer through clicking Menu – layer – new layer. Click on brush and select the one. Which type you want to paint, just it will use for ice effect. Now we will work with the Brush. Make the brush softer.

In this step click on brush area, press and just move quickly. Exchange “ICE” Layer in Smart Object by going to the Right-click then Convert at Smart Object. After then go to Command-click on the Layer’s thumbnail for select whole one. Now concern a Layer Mask to the extra Layers.

With the brush add some and more ice with white color. By which the image will look like realistic.

Make the whole image as look black and water color. For this go to blending option and set it’s Bevel and Emboss, contour, Gradient, Color Overlay, Level. Then pick the brush tool, and choose a normal brush. And the following settings: Shape Dynamics Brush, other Dynamics, and Smoothing. After complete these decrease the size of brush. And again draw as like as previous. You can see the realistic ice effect on text and the figure will looks like below:

Ice Text Effect

Make Blood Text Effect in Photoshop

Blood text effect tutorial we need font – Gypsy Curse and Organic and Bubble Patterns as a .PAT format. In the .PSD document set in RGB mode. Pixel set at 300 x 400 and White Color Background with 72 DPI. Foreground color set at #333333. While the background layer selected the press alt+Delete (at a time). Which will change to dark grey color of the background. In advanced settings Color Profile will be Don’t Color Manage this Document and Pixel Aspect Ratio will Square Pixels.

text effect

Now for the background we need to create a layer. For this choose “Layer from background” through right click on background. Save it the name of as your wish. I saved it as my own name Witsel.PSD. Go from Menu to Layer to Layer Style to Blending Options. Now I will set Blending Mode as below.

Pattern Overlay – Pattern: Set Mode atNormal, Opacity to 61% Pattern – Organic seamless pattern, Scale – 100% also Link with Layer. Press ok.

Inner Shadow – Structure: Set Blend Mode to Linear Burn with color #480000, Opacity – 63%, Angle of 120 degree, Distance set to 0px, Choke at 30%, Size at 133%.

Quality: Contour, Noise – 10%. Then hit OK to set it.

Satin – Structure: Blend Mode at Color Burn with #8d1717, Opacity of 17%, Angle of 19 degree, Distance to 3px, Size at 3px, Contour at Invert. Through clicking OK make sure this setting.

Color Overlay – Color: Blend Mode of Color with #71766a, Opacity at 55%. Don’t forget to press OK.

Gradient Overlay – Gradient: Set Blend Mode of Color Dodge, Opacity – 83%, Gradient Color of #3c2424 and Reverse, Style at Redial also Align with Layer, Angle of 0 degree and scale at 143%. After fixed setting press OK.

Here we will get ready our Background.

Now write something on the canvas. In which font will be Gypsy Curse, the text will be in center. Where I wrote the word: “Q l”. “L” is in small letter.

From Menu go to Layer to Layer Style to Blending Option, and then set the text as like me.

Drop Shadow – Structure: Set Blend Mode at Linear Burn with color #000000, Opacity – 52%, Angle of (-90) degree, Distance set to 3px, Spread at 0%, Size of 13PX.

Quality: Contour, Noise – 0%. Then hit OK to set it. Another thing is Layer Knocks Out Drop Shadow.

Inner Shadow – Structure: Blend Mode to Linear Dodge (Add) with color #ffffff, Opacity of 19%, Angle of 90 degree, Distance set to 2px, Choke at 100%, Size at 2%.

Quality: Contour, Noise – 0%. Then hit OK to set it.

Outer Glow – Structure: Set Blend Mode atNormal, Opacity – 57%, Noise – 0%. And color at #ff0000.

Elements: Technique will be Precise, Spread to 0%, and Size at 4px.

Quality: Contour with Anti-aliased, Range – 100%, Jitter – 0%. And press OK to confirm the settings. Never forget, otherwise everything can be damaged.

Bevel and Emboss – Structure: Style will be Inner Bevel, Technique of Smooth, Depth at 1000%, Direction – UP, Size – 10px, Soften will 2PX

Shading: Angles at (-90) degree, Altitude at 30 degree. Gloss Contour, Highlight Mode – Color Dodge (Add) with # de0404 and Opacity – 34%, Shadow Mode Color Burn with # 3d0000 and Opacity will be 66%, and then press OK.

Contour – Elements: Range 50% with Anti-aliased.

Texture – Elements: Bubble Pattern, Scale at 12%, Depth set at (+10)% and Link with Layer.

Satin – Structure: Blend Mode at Color Dodge with #ffffff, Opacity at 40%, Angle of 90 degree, Distance to 43px, Size at 21px, Contour – Invert. Through clicking OK save it.

Color Overlay – Color: Blend Mode at Color Burn with #8b0401, Opacity will be 13%. Now press OK.

Gradient Overlay – Gradient: Set Blend Mode to Color Burn, Opacity – 42%, Gradient – #000000 and #fefefe, Style of Linear, Align with Layer, Angle at (-90) degree and scale – 47%. Then press OK and Location at 70%.

Pattern Overlay – Pattern: Set Mode atNormal, Opacity to 61% Pattern – Organic seamless pattern, Scale – 100% also Link with Layer. Press ok.

Stroke – Structure: Size at 1px, Position at Outside, Blend Mode atNormal, Opacity at 100%.

Fill Type: Gradient: Gradient and Smoothness with Location (51% of #6c0000, 55% of #ff1616 and 59% of #00000). Style Linear and Align with Layer, Angle at 90 degree, Scale – 100%. Click OK.

Duplicate text layer in this step. From Menu go to Layer to Duplicate Layer and I saved it as Nahin1.PSD. Save you as like your name. Again go to Menu then Layer to Layer Style and Clear Layer Style. For this here we will create different Layer style. Now move Menu to Layer to Layer Style to Blending Options and set as like me.

Blending Options – General Blending: Blend Mode set atNormal, Opacity – 100%.

Advanced Blending: Fill Opacity – 0%, Channel RGB, Knockout – None (Blend Clipped Layers as group, Transparency Shapes Layer).

Blend If: Gray, This Layer – (0-255) %, Underlying Layer – (0-255) %. Click OK to save it.

Drop Shadow – Structure: Set Blend Mode to Color Burn, Opacity – 32%, Angle at 90 degree, Distance – 2px, Spread – 28%, Size 8px.

Quality: Noise – 0% and Layer knocks Out Drop shadow.

Bevel and Emboss – Structure: Style – Inner Bevel, Technique – Smooth, Depth – 1000%, Direction – UP, Size – 5px, Soften – 4%.

Shading: Angles – 96 degree, Altitude at 37 degree. Highlight Mode – Linear Dodge (Add) with # de0404 and Opacity – 0%, Shadow Mode also Color Burn with # 3d0000 and Opacity – 41%, then press OK.

The Image are here:


Learn about Glossy Text Effect

How to create a Glossy Text Effect in Photoshop

Open a new document in Photoshop. Size maintain between 1152 x 864 pixels. Foreground and background will be #5e4a3f and #271509. From the Gradient tool option bar select Linear Gradient Icon. From top to bottom in the canvas drag it.

Now add noise through go to Filter to Noise and Add Noise. The amount will be 1 also select the Gaussian distribution.

Now write a text on the canvas. With the font of RiotSquad and font color is #c7c7c7 and font size will 365.

Copy this text layer. Change the duplicate’s fill value at 0. After that, duplicate this copy layer.

Go to Layer style or double click on Layer to apply the below Layer style.

Bevel and Emboss

Structure: Style – Inner Bevel, Technique – Smooth, Depth – 30%, Direction – UP, Size – 15px, Soften – 0%.

Shading: Angles – 120 degree, Altitude at 30 degree. Highlight Mode – Vivid Light with # e0e0e0 and Opacity – 75%, Shadow Mode Multiply with # 4f3a11 and Opacity – 75%,

Then press OK.

Inner Shadow

Structure: Set Blend Mode to Multiply with color #78614b, Opacity – 75%, Angle at (120) degree, Distance – 0px, Spread – 0%, Size 16px.

Quality: Noise – 0% and Contour.

Pattern Overlay

Pattern: Blend Mode atNormal, Opacity at 100% Pattern – Snap to Origin, Scale – 100% also Link with Layer.

Here have to confirm by Click OK.

Drop Shadow

Structure: Set Blend Mode to multiply with color #804d2e, Opacity – 75%,

Angle at 120 degree, Distance set to 7px, spread of 10%, Size is 10px.

Quality: Contour, Noise – 0% and Contour.

Now press OK.

This will create marble textured effect on the text.

Again double click on the 1st copy text layer for the following setting

Bevel and Emboss

Structure: Style – Inner Bevel, Technique – Smooth, Depth – 30%, Direction – UP, Change Size – 16px, Soften – 0%.

Shading: Angles – 120 degree and un-check the use Global, Altitude at 30 degree. Highlight Mode – Vivid Light, Opacity – 75%, Shadow Mode Multiply with # 393939 and Opacity – 75%,

Then press OK.


Elements: Range 50% and Anti-aliased (Half Round).


Elements: MMarble Pattern, Scale at 100%, Depth – (+242%) and Link with Layer.

These add simply 3D texture on the Pattern.

Then again right click on the 1st copy text, next click on 2nd and select paste Layer Style.

Bevel and Emboss

Structure: Style – Inner Bevel, Technique – Smooth, Depth – 100%, Direction – UP, Change Size – 40px, Soften – 0%.

Shading: Angles – 45 degree and un-check the use Global, Altitude at 74 degree. Highlight Mode – Vivid Light, Opacity – 75%, Shadow Mode Multiply and Opacity – 75%,

Then press OK.

By these we can see a glossy top layer.

In this step take the rush Tool. Choose a 15px and hard round Brush. Then set foreground color of #a5a5a5. On all of Layers create a new Layer. Named it as D, apply the following settings on this Layer.

Bevel and Emboss

Structure: Style – Inner Bevel, Technique – Chisel Hard, Depth – 100%, Direction – UP, Size – 5px, Soften – 0%.

Shading: Angles – 120 degree use Global Light, Altitude at 30 degree. Highlight Mode – Linear Light and Opacity – 75%, Shadow Mode at Multiply and Opacity – 35%,

Then press OK.


Elements: Range 50% and Anti-aliased.


Elements: Concrete wall 2, Scale at 100%, Depth (+508%) and Link with Layer.

Drop Shadow

Structure: Set Blend Mode to multiply with color #804d2e, Opacity – 55%,

Angle at 120 degree, select Global Light, Distance set to 5px, spread of 0%, Size is 5px.

Quality: Contour, Noise – 0%, Contour and Layer Knocks Out Drop Shadow.

Now press OK.

Through use of brush tool add some Dots to create diamond. The tutorial is ready.

How to Create Gold Effect with Sparkling Diamond

In this tutorial I will show how we can create Gold Effect with Sparkling Diamond in the Photoshop. Hope everybody can enjoy this tutorial. Let’s start now.

In the first step we have to open the Adobe Photoshop and open a new file. We know that in the Photoshop the file type is PSD. The created new file size will be 1152 x 864 pixels. Set the foreground and background color black as the color #151515 and #070707. Form the option bar pick Gradient Tool and click on the Radial Gradient icon.

gold effect startNow to create a diamond effects first choose a shape from toolbar. I prefer the circle. But you can choose the polygon. Set the number of sides at 7. Here set the color of foreground at black. And save the document for these settings, just close for this moment.

Now create a new document. By go to the Filter – Filter Forge – Filter Forge 3 open Filter Forge. Below Stone, select the Crystal filter, and then choose the last preset to be had in the Presets tab.

Check the “Seamless Tiling” box go to setting Tab and to apply this press the apply button.

After to get the texture go to the Image – Adjustments – Desaturate. Now go to Edit – Define Pattern. Now type name Crystal Pattern. Close this document and go back the original document. Now apply some Layer Styles.

In this Layer set now Bevel and Emboss. The technique change to Chisel Soft, Gloss Contour to Rolling Slope at descending mode, change the highlight to vivid light, check the anti aliased box with the opacity to 60% and change the shadow mode to #656565 with its opacity to 20%. In the Contour mode check the anti aliased box.

gold effect 1In pattern overlay blend mode save as soft mode. Change the scale to 25% for the Crystal Pattern.

Now set the diamond layer make it more realistic, making look shiner.

Now set the Layer style. For bevel and emboss set style at Stroke Emboss, where desires Stroke effects to work, here I will add Technique Later. Now modify to Chisel Hard with size to 23, check the Anti-aliased box and loss Contour to Ring also modify the Highlight Mode to Vivid Light with its color to #fffcf4. Choose Cove – Shallow for Contour, and then check the Anti-aliased box.

For setting of Stroke I will use the color #a18f53 and change the Size to 15. In the Inner Shadow set the distance to 3 and modify the color to #78614b.

By these settings I will get the top part of the golden stroke.

Now I will set Inner Glow. Transform Blend Mode to multiply through the color to #c1bd84. By these I got the golden stroke.

In duplicate copy layer set the Layer Style like below:

To the stroke transform the Size to 14, from Blend Mode at Soft Light, Fill Type at Gradient, and Angle at 45, also Scale at 150. Select Grey Fan F10 – angled gradient which you can find-out in the DIALS.grd file to gradients pack.

By the following settings we will show the sparkles in different sizes.

gold effect 2Under the Gradient Map adjustment layer take a new layer. Rename it at “Sparkles”. Over the diamond start clicking to add sparkles by set foreground color at “#ebebeb”. Just as you want here and there.

Now add the Diamond in a frame like me. And add a border in around the diamond.

The figure are given below.

gold effect